Direct Attach Cable
( Passive Cable )
400G QSFP-DD DAC Series
- Compatible with IEEE 802.3bj and IEEE 802.3cd
- Supports aggregate data rates of 400Gbps(PAM4)
- Optimized construction to minimize insertion loss and cross talk
- Pull-to-release slide latch design
- 28AWG through 30AWG cable
- Straight and break out assembly configurations available
- Customized cable braid termination limits EMI radiation
- Customizable EEPROM mapping for cable signature
- RoHS compliant

100G QSFP28 TO QSFP28 DAC Series
- Compliant with SFF-8636
- Support IEEE802.3Bj(Ethernet)
- I2C based two-wire serial interface for easy control and monitoring
- Hot Pluggable
- Low Crosstalk
- Low power consumption

100G QSFP28 TO 4*SFP28 DAC Series
- Compliant SFF-8636、SFF-8402
- Compliant Sonet IEEE802.3bj
- Operating case temperature: -40 to 85°C
- All-metal housing for superior EMI performance
- Precision process control for minimization of pair-to-pair skew
- AC coupling of PECL signals
- EEPROM for cable signature & system communications
- 30 AWG to 26 AWG cable sizes available
- RoHS compliant

100G QSFP28 to 2x 50G QSFP28 Copper Breakout Cable
- Compliant with IEEE 802.3bj
- Compliant with SFF-8665
- Up to 100Gb/s data rates
- Ultra low crosstalk for improved performance
- Low insertion loss
- BER better than 10-15
- Serial numbers printed on each end
- Tested in an end-to-end system
- RoHS compliant

40G QSFP+ TO QSFP+ DAC Series
- Compliant QSFP MSA specifications
- Fully compatible with IEEE802.3ba and Infiniband QDR specifications
- 40Gb/s total bandwidth
- 4 independent duplex channels operating at 10Gbps, also support for 2.5Gbps, 5Gbps data rates
- 100 ohm differential impedance system
- Single 3.3V power supply, low power consumption, <1>
- Low Near-End Crosstalk(NEXT)
- Operating case temperature: -40 to 85°C
- All-metal housing for superior EMI performance
- Precision process control for minimization of pair-to-pair skew
- AC coupling of PECL signals
- EEPROM for cable signature & system communications
- 30 AWG to 24 AWG cable sizes available
- RoHS compliant 1>

40G QSFP+ TO 4*SFP+ DAC Series
- QSFP to 4x SFP+ Splitter Cable offers IT professionals a cost-effective interconnect solution for merging 40G QSFP and 10G SFP+ enabled host adapters, switches and servers. For typical applications, users can install this splitter cable between an available QSFP port on their 40Gigabit/s rated switch and feed up to four upstream 10GbE-SFP+ enabled switches. Each QSFP-SFP+ splitter cable features a single QSFP connector (SFF-8436) rated for 40-Gb/s on one end and (4) SFP+ connectors (SFF-8431), each rated for 10-Gb/s, on the other.
- QSFP to 4 SFP+ Splitter Cables designs and sources every subassembly in-house guaranteeing complete control over product performance, quality and consistency. Examples include our widely respected board-as-connector platform which is direct-welded to the wire and encased in a robust Zinc-Nickel back shell for superior crosstalk and EMI performance.
10G SFP+ TO SFP+ DAC Series
- Support for multi-gigabit data rates up to10Gb/s
- Data rates backward compatible to 1Gb/s
- Hot-pluggable SFP 20PIN footprint
- Improved Pluggable Form Factor(IPF) Compliant for enhanced EMI/EMC performance
- Low Power Consumption < 0.2W
- Power Supply :+3.3V
- Compatible to SFP+ MSA
- Compatible to SFF-8431,SFF8432
- Temperature Range: 0~ 70 °C
- RoHS Compatible